pf::Switch::Cisco::Catalyst_3560G
Object oriented module to access and configure Cisco Catalyst 3560G switches
12.2(50)SE1 has been reported to work fine
Recommended IOS is 12.2(55)SE4.
The hardware should support it.
802.1X support was never tested by Inverse.
Because a lot of code is shared with the 2950 make sure to check the BUGS AND LIMITATIONS section of pf::Switch::Cisco::Catalyst_2950 also.
For some reason when securing a MAC address the switch loses an important portion of its config. This is a Cisco bug, nothing much we can do. Don't use this IOS for VoIP. See issue #1020 for details.
For some reason this IOS doesn't put VoIP devices in the voice VLAN correctly. This is a Cisco bug, nothing much we can do. Don't use this IOS for VoIP. 12.2(55)SE4 is working fine.
Translate RADIUS NAS-Port into switch's ifIndex.
Inverse inc. <info@inverse.ca>
Copyright (C) 2005-2015 Inverse inc.
This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version.
This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.
You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.